Metal ceramics on the front teeth - what are the reviews of patients?

Cermet on the front teethProbably, there are no people who do not care about their appearance. At the same time, one of the important details that affects the attractiveness of a person is the condition of his front teeth. I would like to immediately note that despite the relative high cost of prosthetic services, they are quite accessible to the average man in the street. You just need to choose one of the appropriate treatment options, the most high-quality and relatively affordable of which is prosthetics with the use of metal ceramics, reviews of which will not leave a single drop of doubts about the correctness of the choice.

Prosthetics by metal ceramics

In many modern dentistry with prosthetics practiced use of metal structuresacting as a base on which a special ceramic material is applied - this is a metal-ceramic prosthesis. At the same time there is a huge range of crowns for the manufacture of which use both metal ceramics and other modern alloys.

To meet the basic requirements of the reliability of prostheses, metal-ceramic constructions are made using chromium, cobalt or nickel. But at the request of the patient can be applied alloys of precious metals such as platinum or gold. Naturally, such materials significantly increase the cost of prosthetics, although as a result, the appearance of the prosthesis will be as close as possible to natural human teeth.

Despite the high cost of materials on prostheses don't save too much, because cheap options will not give the desired aesthetic result and you will not have to dream of a brilliant smile. The use of cheap metal-ceramic prostheses will lead to the fact that artificial teeth will be very different from natural analogues and look unnatural.

Prosthetics on the front teeth

Before dealing with the positive and negative aspects of such prostheses, as well as methods of prosthetics, you need to stop some interesting features the use of metal ceramics on the front teeth.

  1. Types of metal ceramicsTaking into account the fact that in the process of a conversation or when a person smiles, the front dentition is constantly visible, its appearance should be perfect. Therefore, even despite the high cost, it is recommended to use alloys of gold and platinum.
  2. The use of cheaper chromium compounds gives the artificial teeth a gray tint, so in daylight the ceramic-metal construction will look slightly unnatural. Plus, chromium can darken the gums under the implants because of this material is oxidized.
  3. Maximum use of metal-ceramic prostheses is suitable. when recovering from two to five consecutive damaged or missing teeth in the front row. This is due to the fact that in such a situation a bridge is used due to which the cost of the prosthetic structure is significantly reduced.
  4. It is very important that the preparation of organs in oral cavity on the front row of teeth, which is produced in the process of preparing for prosthetics, it was strictly in compliance with the necessary technological process.

Metal ceramics on the front teeth - advantages

Cermet implantsIf a patient for some reason lost one or more teeth in the front row, then there are many technologies to deal with the problem, one of which is prosthetics with the use of metal ceramics. The use of metal-ceramic prostheses makes it possible to obtain artificial teeth identical in color to the natural enamel.

It is for this reason that prosthetics with the use of metal ceramics in the front row has gained maximum acceptance in modern dentistry. The use of artificial teeth will make the smile of any patient truly attractive. Plus, the above metal ceramics in the front row of teeth has a wide range of advantages, patient reviews of which coincide with the opinion of doctors.

  • The ability to accurately convey the shade of the color of an artificial tooth in accordance with the natural enamel. This achieves the most aesthetic appearance of the prosthesis.
  • The use of metal ceramics for prosthetics of the front teeth allows you to make the whole procedure affordable. The minimum lifetime of this kind of prosthesis is more than 10 years.
  • Finished dental design in its form 100% repeats natural teeth.
  • Metal-ceramic prostheses and crowns are not destroyed during operation and have a sufficiently high strength.
  • The technique of prosthetics with the use of metal ceramics is available in almost all dentistry of our state.

Negative sides of cermet

Metal-ceramic prostheses in the anterior dentition, reviews of which are mainly found only positive, have their negative sidewhich patients should be aware of.

  • The advantages of metal ceramicsWith this prosthesis, it is mandatory depulping of healthy supporting teeth, which, in turn, reduces their durability and reliability.
  • In the case of the use of metal-ceramic crowns, the materials used for their manufacture must be of high quality, which, in turn, makes prosthetics more expensive. Otherwise, poor-quality materials may cause an allergic reaction in the patient.
  • Also not excluded development of inflammatory processes, especially if all the technological processes were not observed by the dentist or materials of doubtful quality were used.

Front teeth implantation

Front teeth implantationIf the patient has partially or completely missing teeth on the front row, then there is another modern method of prosthetics using metal ceramics. It goes on spraying ceramic material on a pre-implanted titanium implant. In this case, implantation using cermet sputtering to restore lost teeth on the front row is used in the following variants:

  • as a single prosthesis placed on an implanted implant;
  • as a bridge construction of several firmly connected crowns, the number of which does not exceed 5 units;
  • as a removable prosthetic structure, which, if necessary, is easily dismantled.

Naturally, the question may arise - why such a universal material not used as an implant? The fact is that it is impossible to use pure ceramics as an implant replacing the root, as it crumbles easily and cannot withstand chewing loads placed on dental roots. However, thanks to her, you can achieve the maximum aesthetic result and therefore it is so valued by dentists during prosthetics. Therefore, a combination of metal and ceramics was created, which made it possible to achieve good results of beauty and quality.

Phased installation of metal-ceramic prosthesis

Before direct fixation of the prosthetic structure, a scrupulous preparation of supporting and damaged teeth. During the first visit to the prosthetist, he holds a number of certain preparatory activities.

  1. Manufacturing and installation of implantsX-ray examination procedure. In the photographs, the dentist examines inflammatory foci and other undesirable processes that take place in the places treated. All detected pathologies are necessarily eliminated, since the prosthesis can be installed on absolutely healthy organs of the oral cavity.
  2. The preparatory stage also implies the solution of questions about the advisability of using the stump tab. In more than half of the cases immediately before the prosthesis. corresponding pins are installed. The only exceptions are molars.
  3. Depulping before prosthetics it is necessary to carry out immediately before installing the crowns. It should be noted that reviews of this kind of procedure are ambiguous and depend on the level of the dental clinic conducting the prosthesis. Recently, the development of dental technology allows you to install the crown without removing the dental nerve.

At the next stage, they go directly to the installation of a metal-ceramic structure. In this case, the reliability and quality of the prosthesis will depend on compliance with prosthetic technologywhich consists of certain stages.

  1. High-quality obtachka teeth to be prosthetic. The durability and quality of fixation of the metal-ceramic prosthesis or crown will depend on compliance with the facing technology.
  2. Prosthetic Construction performed in specialized dental laboratories. The basis of the prosthesis is a special impression prepared in advance by a prosthetist who installs the metal-ceramic on the front row of teeth. At the same time the convenience of the finished prosthesis reviews which are very different, mainly depends on the quality of taking measurements.
  3. For the time being, a permanent prosthesis will be manufactured, in order to protect prepared teeth, temporary crowns are installed.
  4. In addition to the quality of the material, careful selection of the color of the finished prosthetic design. It is selected individually, in accordance with the color of the enamel of adjacent natural teeth. At the same time, thanks to the metal-ceramic on the front teeth, the hue of the latter practically does not differ from the natural analogues.
  5. Before applying the final layer of coating, perform the fitting of a prosthesis or crown, which allows you to make the necessary adjustments.
  6. After all fittings, decorative glaze is applied.
  7. The crown is fixed using a special adhesive that guarantees reliability and durability. denture.

It should be noted that cermet on the front teeth is the most common in prosthetics. The main thing is a good prosthetist, reviews of which need to be studied before contacting him for services. And then in the end the patient will get an attractive smile.

Reviews

Do not distinguish from the real!

I came to the dentist thanks to friends who advised me to the doctor. When I first visited, I was taken a panoramic 3D shot. When you visit again, the doctor took a copy. On the third time they performed fitting and fitting while they slightly hurt the gums.

Well, after the final session, I left with new ones, albeit with artificial teeth. The procedure itself took no more than an hour. Although I felt very tired after that, I was quite pleased with the result.

Lena Rybak

I am afraid of dentists and therefore the trip to the polyclinic was debugged until the last while the teeth could not be saved. After that, we had to put crowns from metal-ceramic. At first, I felt discomfort, but after 4 days everything went away.To date, I am pleased with everything, especially given a guarantee for a year. The problem with the teeth is probably a headache for many, not only for me, but despite the fear, when teeth hurt without going to the dentist is not enough.

Igor

I am the happy owner of 3 cermet crowns. At first I planned to deliver 2, but a problem was revealed with the third tooth. The procedure of turning the teeth turned out to be very unpleasant, several times it hurt the gums.

The crowns were made fairly quickly, although one had to be adjusted for a long time, since they did not want to get into place, and six months later it fell out, but under the guarantee the doctor redid everything for free. But in principle, I am satisfied with the result.

Max

Implantation

Veneers

Crowns