Rating of the best dental implants by manufacturers

Front teeth implantationInstalling dental implants for many years can solve the problem with missing teeth in humans. A large number of people install dental prostheses, in connection with which they are offered by manufacturers from around the world. The choice of designs is so great that finding a suitable and high-quality implant can be a real problem. This will help in the rating of dental prostheses by manufacturers.

Types and advantages of implants

The feasibility of installing a dental structure depends on the examination of the patient and his examination. In some cases, the dentist may recommend replacing missing teeth with fixed or removable dentures. But such structures often cause discomfort, and their installation requires facing of the abutment teeth. Therefore, many people choose to install implants.

Their benefits include:

  1. Multifunctionality. There is a large selection of designs that vary in materials of manufacture and characteristics. Therefore, for each patient, depending on the density of his bone tissue, you can choose a suitable product.
  2. Prevent jaw deformity. The bone tissue between missing teeth softens over time, which leads to displacement of the remaining teeth. As a result, the bite changes, lips and cheeks fall, the face takes on a senile appearance. With the help of dental implants, you can avoid negative consequences by maintaining the same pressure on the jaw.
  3. Painlessness Dental prostheses made of special material grow together with the bone, without causing any painful sensations.
  4. Durability. Dental implants from reputable manufacturers are distinguished by their quality and reliability. Many firms give them a long or even lifetime warranty.
  5. Aesthetic appeal. The outer crown installed on the implant is matched to the color of natural teeth and practically does not differ from them.

When choosing the best implant, the dentist is guided by its location and implantation technology. Exists several types of dental constructions:

  1. Manufacturing of dental implantsRoot - threaded cylindrical prostheses. Installed in place of the missing tooth in the presence of a sufficient amount of bone tissue.
  2. Plate implants are used if the bone is rather narrow.
  3. Combined are root and laminar prostheses. They are large in size and complex in configuration.
  4. Endodontically stabilized implants are used to strengthen the root.
  5. Subperiosteal dental prostheses are used for severe bone thinning. A rather large construction is established between the bone and the periosteum.
  6. Min-implants or intramucous prostheses are not inserted into the bone tissue. With their help, removable structures are stabilized.

Premium Implant Rating

This is the most prestigious and expensive designswhich are of high quality and have a lifetime warranty.

Nobel biocare

Implants from the Swiss manufacturer, except for Sweden, are also available in Israel, Japan and the USA. Their main characteristics and advantages are:

  1. The triangular surface of the prosthesis that allows you to fix it more tightly.
  2. The conical shape of the product reduces injuries during the implant installation.
  3. The design can be installed as a method of simultaneous, and two-stage implantation.
  4. The surface of the dental prosthesis is characterized by a porous structure, with the help of which blood cells are rejected, and fibrin is accumulated. Due to this, around the implant quickly and without any complications builds up bone tissue.
  5. The survival rate of the structure is more than 99%.

Nobel Biocare implants are of high quality, and their manufacturers give a lifetime warranty.

Straumann

Swiss company of the same name began to produce implants more than 60 years ago. The technology of their production is constantly being improved, which allows Straumann dental constructions to be included in the global rating, occupying the top lines. The main characteristics of implants include:

  1. The best dentures and implantsUse a variety of materials. Implants can be made of ceramics, zirconium, titanium or leucosapphire gemstone.
  2. The amount of bone tissue for implanting the construction does not matter.
  3. Remove the nerves and grind teeth is not necessary.
  4. Implants can be installed in one or two stages.
  5. The bone is pressed very tightly against the established prosthesis and does not allow it to loosen.
  6. Due to the hydrophobicity of the material, the implant does not get wet and only takes about four weeks to survive.

Dental constructions from the manufacturer Straumann can be used even in the case of such contraindications as bone atrophy, diabetes, smoking and many others.

ROOTT

Swiss implants ROOTT from the concern Trate AG proved to be effective during long-term clinical trials in European dental clinics. What determines the success of ROOTT implantation and the relevance of this type of system?

  • The line of implants includes root-shaped, compression, basal implants. For any problem associated with missing teeth, there is a solution.
  • ROOTT can be used for urgent implantation, for example, when a patient sets a task for a doctor - to restore all teeth in 2-3 days.
  • ROOTT systems are ideal for restoring the frontal zone - forming an aesthetic gingival margin.
  • The development of Swiss scientists in terms of surface treatment of implants, has reduced the period of osseointegration by 1.5-2 times.
  • The percentage of engraftment - 99.2% - is similar to that of premium systems, while the manufacturer of implants ROOTT, TRATE AG, recommended the price of the installation and approximates the average price segment.

Xive

Implants from German manufacturers have been on the market for more than 10 years and are in great demand in Russia and many European countries. Their advantages are:

  • a special type of thread that holds the tooth securely in the bone tissue;
  • for preliminary fixation, own intermediate links are used - the abutment of a special AuroBase design, the CERCON zirconium abutment or the TempBase temporary abutment;
  • dental structures can be installed, even if the bone tissue is discharged;
  • for a narrow alveolar ridge, XiVE 3.0 series prostheses are used;
  • percentage of survival is 99.5%.

Anthogyr

Dental constructions from a French manufacturer combine high reliability and quality with ease of installation. They shipped to 80 countrieswhere are in great demand. Features and benefits include:

  1. What material are implants made of?Products made of titanium are processed using a special patented technology. The biocompatible particles used make it possible to create a slightly rough surface ideal for an implant.
  2. Complete sterility of the structure is achieved by its purification and deactivation under the gamma-ray flux.
  3. Thanks to a special thread, the prosthesis optimally distributes the load on the bone.
  4. The edges of the implant are almost invisible after installation.
  5. The design forms a peri-implant tissue identical to periodontal tissue, helping to speed up the healing process.
  6. When using the Anthogyr implant, the rejection reaction is practically excluded.
  7. The rough neck and anatomical shape allows you to avoid the formation of pockets along the dental prosthesis.

Designs "Antozhir" combine high quality, reliability and durability.

Astra Tech

The Swedish company is known among dentists all over the world for its high-tech scientific developments and full certification of products. The success of Astra Tech implants is due to design featureswhich include:

  1. The microroughness of the surface of titanium rods, which is obtained by special metal processing. Due to this, bone healing and tissue restoration occurs rather quickly.
  2. A special micro-thread is an additional element for the growth of bone tissue.
  3. The special design and the conical joint transfer loads into the deeper layers of bone tissue.
  4. The abutment is fastened according to a special system, with the help of which the crown is firmly fixed on the titanium root and the gum is well formed.
  5. The special screws that fulfill the function of the cap protect the tooth from negative impact.

Astra Tech implants are high quality and 99.9% survival rate. The company gives a lifetime warranty on its products.

The price of one premium implant - from 35,000 to 70,000 rubles.

Virtually all of the above manufacturers offer specialist training and equip dental clinics with computer simulation systems and diagnostic equipment.

Mid-priced implants

Compared with premium dental prostheses, such constructions are cheaper, but have good quality:

  1. Implant manufacturersNiko - implants of the Russian manufacturer, which include German titanium alloys. In its developments, the company relies on modern advances in dentistry and produces temporary and permanent dentures for teeth. Titanium alloy made by German technology is reliable and does not cause allergic reactions. High survival rate is provided by a special relief surface, and a uniform load on the tooth - a cylindrical shape of the structure. Due to the hexagonal shape of the intraosseous part in the dental hole, the implant does not roll. The company employs Russian and foreign specialists, which allows to take into account the national specifics of the market.
  2. Zimmer is an American company that launched implants for teeth in 2003. There are three types of Zimmer designs on the market today - thin, standard and mini-implants. ” A feature of the detailed prostheses of American manufacturers is the material of their manufacture. Instead of standard titanium, tantalum is used. This material does not possess allergenic properties and has excellent compatibility with body tissues. Special design and its special coating allows you to create prostheses even in difficult clinical cases. They can be installed with a large deficit of bone tissue. The company's specialists have developed the latest tools that are used for implantation.
  3. Schutz is a German company that has long been engaged in the production of dental implants. Its products have a wide range of designs of different lengths, thicknesses and diameters. Separate prostheses and abutments are available. For patients even mini-systems are provided. The artificial root created by experts is almost an exact replica of the natural root. It helps to carry out the installation painlessly and gives the structure reliability and durability. Due to special materials and forms of construction, manufacturers tried to minimize pain during the operation.
  4. Dentsply Friadent is a German company producing implants of the Ankylos system.For their production, it uses high inert titanium of high quality. It does not enter into any reactions with living tissues, due to which there is no rejection of the rods and no allergic reactions appear. Thanks to the microrough surface, around the prosthesis, rapid growth of bone tissue is provoked, which at the cellular level contributes to their rapid adhesion. Specially designed thread allows you to reliably establish the structure even at the initial stage and to achieve maximum stability. The product range allows simultaneous implantation, which is very important when restoring the front teeth.

All the above designs have universality, reliability, high aesthetics and relatively low cost.

Budget level implants

Despite the fact that the designs of some manufacturers have a lower price, they are of good quality and are in great demand.

Korean Osstem implants

Which denture or implant is betterDental constructions for the teeth of the Korean company Osstem known in more than 50 countries. Due to the fact that manufacturers are investing in their development and research of large funds, Osstem products are of the highest quality and affordable price.

The Korean company produces two main implant systems - MS and TS, as well as all the components and tools necessary for their installation.

Features of implants for teeth "Ossthem":

  1. Models of structures differ in length and diameter, can be temporary and used for fixing removable dentures. Such a variety of products can solve almost any clinical problem.
  2. Bone cells penetrate into the sandblasted rough surface with micropores. Due to this, the dental prosthesis easily connects with the bone and quickly gets into it.
  3. The company Ossthem offers a wide range of abutments. They can be made of zirconium and have a shade of "ivory", or of titanium with a gold base in the color of the gums. For complex clinical cases, inclined abutments are made.
  4. The last turn missing at the base of the construction allows in the gum area to reduce the load on the bone, preventing its atrophy and necrosis. Throughout the life of the prosthesis, the bone remains strong.
  5. Due to the special coating, the implant survives for one and a half months without any complications.
  6. The rough surface undergoes a special cleansing, which increases its sterility. This helps prevent the development of a foreign body allergic reactions and eliminates the risk of wound infection.

The manufacturer claims that with professional and high-quality installation of its products, Osstem implants will last a long time and gives them a lifetime warranty.

Israeli dental prostheses MIS

Israeli company in the dental market for many years. For the manufacture of implants from bioinert titanium using high-precision titanium and modern Swiss equipment. MIS Products has the following types of models:

  1. Implantation of front teeth costV - design with a concave profile type and a triangular coronary part. Used to replace the front teeth and to install small-sized bones.
  2. C1 is distinguished by a cone-shaped rod and a hex conical abutment. Used for multi-stage implantation.
  3. M4 - screw-type prostheses made in the form of a cylinder are distinguished by self-cutting thread and conical end. Can be used for classical or one-step implantation.
  4. Uno - holistic type model is designed to replace single cutters.
  5. Link is an orthopedic system and is installed as additional supports.

Dental prostheticsIn addition to the above models, the company MIS produces mini implants with a small rod diameter.They are used most often when installing complete structures.

The products of the Israeli company has a limited warranty period of 5 years. Manufacturers assure that implants will last for a long time, but only for a certain time they guarantee their complete replacement.

Due to the fact that implant manufacturers produce products of various sizes, shapes and types, it is possible for each clinical case to choose the right design. And it does not have to be an expensive product. Many budget implants are also of high quality and can last for many years.

Implantation

Veneers

Crowns