Currently, in Moscow and other major cities in dental clinics, doctors offer their patients the installation of implants on the teeth from leading manufacturers from around the world.
At the same time, their prices may differ significantly. How to understand their abundance and make the right choice? How to choose the implant, the price and quality of which will be the most acceptable? All this you will learn from this material.
Content
Stages of tooth implantation
Dental implants are put in several stages:
-
The disease is removed in the oral cavity, which can adversely affect the engraftment of the implant. - Prepare a bed for it. When using the patchwork method, the gums are peeled off, and a hole is made in the bone tissue by means of a drill, and with the mini-invasive method, the bed is prepared through a gingival puncture, it is not necessary to peel it off. It will not be so traumatic.
- Put an artificial root.
- The implant survives.
- Set the crown of the tooth. If the implantation is two-stage, then it occurs in a few months, and when one-stage implantation - then after a few days.
If a person has bone problems (for example, insufficiency or looseness), then before surgery bone build up.
How to choose the right implant
As already mentioned, different designs have different prices. The most expensive implants will be manufactured in the following countries:
-
Germany. - South Korea.
- USA.
- Sweden
- Switzerland.
- Of Israel.
But Russian products will be much cheaper. Sometimes it is extremely difficult to make a choice, because in Moscow it is simply enormous, and outwardly it is practically impossible to distinguish expensive from cheap products.
It should be said that implants differ not only in price. You need to select them by the following indicators:
- parameters (diameter and length);
- manufacturing material;
- shape and thread;
- complete set of the product.
Types of dental implants
In addition, it is necessary to choose implants not only depending on the listed indicators and prices, but also on their shape.
Root Implants - the most common and versatile designs. Have the shape of an elongated cylinder, which is narrowed down. They are used to restore both one tooth and several at once.
The form is not suitable for bone degeneration and other complex cases. Implants from different manufacturers may differ from each other in devices that facilitate their survival and installation.
Plate constructions - such implants for teeth are rarely used now. They differ from the previous ones by the absence of a thread and have the appearance of a metallic flat plate, which is embedded in a deep bone layer. Adapters are attached to the top, and a crown is placed on them.
They are unpopular, because the mucous can be injured, and survival rate is accompanied by inflammation. But the advantage of plate implants is the ability to install even in a thin atrophied bone.
Combined implants - are a mixture of the previous two species. They are introduced in stationary conditions, since they are large in size and have a complex shape.They are placed with serious defects of bone tissue, if it can not be increased and when there is no large number of teeth.
Endodontic stabilized dental implants - they are placed when a healthy dental root is preserved. Through its top they are placed in the bone, which strengthens and lengthens its root. Then you can continue to restore the coronal part of the lost tooth.
The patient will not need to remove the dental root, which reduces the chance of injury. But the disadvantage of such structures is that the root in the absence of a nerve will deteriorate even with careful dental hygiene. With caries, both the root and the implant are removed.
Subperiosteal constructions - they are most often used for the purpose of prosthetics of the dentition in older patients. They can be used even with exhaustion of bone tissue, and they withstand the load due to the large area. At the top, metal-based beams are placed on them, which are used in full prosthetics of the dentition.
Intra mucous implants - inserts of small size, resembling a mushroom with a flat cap. Bone tissue is not affected, and mucous membrane is not damaged much. Dentures are placed in pre-prepared holes in it. With the help of such implants, you can fix complete removable dentures that stand on the round portion jutting out from above.
Each clinical case provides the possibility of using dental structures, which differ in price and other parameters. Some can be used in combination, for example, after injuries.
Material for the production of implants
Titanium constructions have been used for many years and are well fused with bone tissue. However, the risk of rejection is still high, so thanks to different coatings, you can improve the properties of titanium.
Many elite dental implants offered in Moscow clinics are equipped with special coatings that increase the percentage of their survival to almost one hundred percent.
Titanium is one of the best materials for the manufacture of dental implants. He has all the necessary qualities for the procedure:
- strength;
- ability to withstand heavy loads;
- practically does not cause allergies.
Characteristics of known implant models
In the domestic market there are a large number of implants from different manufacturers. In Moscow, they are often offered in expensive dental clinics for such operations.
Nobel implants. They are equipped with a special TiUnite coating. They are produced in Switzerland and present on the world market for many years. Many surgeons and patients in the clinics of Moscow and other major cities in Russia and the world choose these products.
And all this despite the fairly high price, which in Moscow with the installation is about $ 550 for one implant. This product has the following advantages:
- The presence of a bioactive coating that helps to increase platelet activity in the installation area of the structure and absorbs blood protein. Due to this, the implant does not resemble a natural root in its characteristics, it improves the survival rate, inflammation and infection are reduced to zero.
- Products are carefully monitored.
- A unique implant system reduces the risk of injury during tooth implantation.
- Triple thread design improves fastening.
- Warranty for several decades.
As already mentioned, the price is high, but it is compensated by functionality, ease of use and safety for implantation. Depending on the clinic, in Moscow the installation will cost from 500 to 750 y. e.
Ankylos implants
This brand of dental implants is made in Germany and has the following characteristics:
-
It has a special patented system that does not allow even a small mobility and does not allow microbes to penetrate into the gaps between the structure and bone tissues. - The abutment and artificial root are connected below the gum, which looks aesthetically pleasing and provides good fixation.
- Warranty for 25 years.
The price of this design is also quite high. In private clinics in Moscow, it varies between from 800 to 850 y. e. As with all premium products, the patient may be confused only by the high price of the implant.
Cost and description of implants Astra Tech and MIS
These Swedish implants have high quality and unique shape, due to which the bone tissue is well preserved and the minimum is deformed even with prolonged use. Huge advantage is range of sizes and shapes implants, as well as coating with special coating, due to which the merging is much faster and more comfortable.
The price for the design itself and its installation is somewhat lower than the previous options, but at the same time you get a quality product that can be worn for years. She is starts from 400 y. e. in Moscow dentistry.
But the products of the brand MIS are made on the basis of titanium treated with a special acid and have three varieties, which are selected in each case individually. Their price is more acceptable for buyers with low income.
But the disadvantage of such implants is that the manufacturer provides a guarantee of only 5 years, however, if they are installed correctly, the service life is much longer. The price of the design and installation in Moscow starts from 400 y. e.
Product Description Straumann, XIVE and Bio Horizons
Implants Straumann from Switzerland belong to the luxury class, their price can reach more than 1 thousand y. e. Distinctive features are:
-
overstrength; - long operation without the need for repair and replacement;
- possibility of installation with minimal trauma;
- fast healing and lack of sutures.
German implants Xive possess good quality and will be executed taking into account all requirements. They have a short survival due to the presence of microporous titanium in the composition. Bone tissue grows into the pores and quickly strengthens the structure in the gum, problems after implantation are practically excluded.
A wide range of abutments greatly simplifies the installation of the structure and gives an attractive appearance. Price of constructions in Moscow clinics from 450 to 600 y. e.
Bio horizons - these products are made by an American young company that has already managed to establish itself in the market. Their advantages are:
- Surface providing a high percentage of successful growth.
- A joint that combines an implant with a crown and improves the strength of the entire structure.
- A special thread that holds the artificial root and bone well together helps to evenly distribute the load.
- Large range of models.
- Biocompatibility.
The average price of products with installation in the capital - about 500–600 y. e.
Other brands of dental implants
Implants brand implants are of high quality and affordable in terms of price, they take root well and can be used for thin bone. The cost of implants in different clinics can vary from 300 to 600 y. e.
Other designs Swiss brand ROOTT well suited for single stage implantation. These models are distinguished by their integrity, the design includes an implant and an abutment. Building bone in this case is not required.
Implants are introduced by a mini-invasive method, which shortens the period of subsequent rehabilitation and removes side effects after the procedure. Price with installation - order 400–500 y. e.
Implants ARDS (Israel) have a high quality, two-level thread, ensuring the stability of the application. At the tip there is a special notch so that when the structure is screwed into the bone, it can penetrate as deep as possible and not be loosened afterwards.
Thanks to them, you can evenly distribute while chewing the load on your teeth, you will not feel pain and discomfort in the area of the presence of a foreign body. Price implant and installation - order 400–500 y. e.
And to install Bicon construction the doctor will only need to puncture the bone slightly, and then screw it in. It will not be necessary to cut the soft tissues and stitches, respectively, after the procedure, the patient will not suffer from swelling and bleeding.
And the design is such that the implantation can be done immediately after the extraction of the tooth, and then the doctor can install the crown. Average price in clinics - 600 y. e.
A well-known brand in the dental implant market is Shutz dental. The manufacturer pays special attention to sterility. After production, the implant is packaged in a double glass flask, where microbes cannot enter. There are 4 types of designs, including mini-versions. Price can vary from 550 to 850 y. e.
There are budget options for installing implants. So, brand "Rusimplant"- domestic, but in the production of technology involve global manufacturers. The price of its installation with the material - from 100 u. e. that is available even for retirees.
You can install implants on your teeth in Moscow for everyone, it is important to choose a good clinic and a doctor where you will find the most suitable designs for the characteristics and reasonable price for you.
The average cost of dental implants in Moscow
In Moscow, the price of one tooth implant, taking into account all the services, is from 20 to 40 thousand rubles. Price may be higher, it all depends on the following factors:
-
Implant material and production mark. - Type of anesthetic and anesthesia.
- The degree of complexity of the procedure and additional surgical procedures (bone grafting, sinus lift, etc.).
- Type of prosthesis.
- Auxiliary materials (physical solutions, surgical drills, sutures, temporary crowns, impression materials, etc.).
- Qualification of the surgeon and his assistant, etc.
And if the price is less than 20 thousand, then it should alert you. It may not include all the provided procedures and services, respectively, the final price may be significantly higher. In addition, such a low price establish questionable clinicsThere are a lot of them in Moscow.
Loading ...